Register Log In

doublegunshop.com - home Forums General Discussion DIY Gunsmithing @ doublegunshop.com Harden barrel hook?

April
S	M	T	W	T	F	S
	1	2	3	4	5	6
7	8	9	10	11	12	13
14	15	16	17	18	19	20
21	22	23	24	25	26	27
28	29	30

Who's Online Now

8 members (Argo44, CJF, Jem Finch, ClapperZapper, battle, 1 invisible), 452 guests, and 4 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums10

Topics38,480

Posts545,220

Members14,410

Most Online1,335
Apr 27th, 2024

Print Thread

Harden barrel hook? #485551 07/12/17 11:33 PM
Joined: Aug 2013 Posts: 973 Likes: 23 Durham NC Bill Graham OP Sidelock
OP Bill Graham Sidelock Joined: Aug 2013 Posts: 973 Likes: 23 Durham NC	Feeling great about success today about gettting my Field SLE project back on face by TIG welding, smoking, and filing. I've failed at that task before, so I guess I learned from it. The weld cooled slowly, and I'm wondering if it needs to be hardened. If so, how do you heat it but not compromise the solder, etc.? If not, thanks for reading the post nonetheless.

Entire Thread
Subject	Posted By	Posted
Harden barrel hook?	Bill Graham	07/13/17 03:33 AM
Re: Harden barrel hook?	damascus	07/13/17 11:01 AM
Re: Harden barrel hook?	Bill Graham	07/13/17 01:46 PM
Re: Harden barrel hook?	B. Dudley	07/13/17 04:05 PM
Re: Harden barrel hook?	keith	07/14/17 04:01 AM
Re: Harden barrel hook?	Bill Graham	07/14/17 04:11 AM
Re: Harden barrel hook?	B. Dudley	07/14/17 12:49 PM
Re: Harden barrel hook?	Bill Graham	07/14/17 06:13 PM
Re: Harden barrel hook?	damascus	07/14/17 07:04 AM
Re: Harden barrel hook?	Run With The Fox	07/14/17 12:35 PM
Re: Harden barrel hook?	gunman	07/26/17 01:14 PM
Re: Harden barrel hook?	Mark Larson	01/26/18 07:04 PM
Re: Harden barrel hook?	Mark II	01/26/18 07:45 PM

Link Copied to Clipboard

doublegunshop.com home | Welcome | Sponsors & Advertisers | DoubleGun Rack | Doublegun Book Rack
Order or request info | Other Useful Information

Updated every minute of everyday!

Copyright (c) 1993 - 2024 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)

Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 0.356s Queries: 16 (0.336s) Memory: 0.8141 MB (Peak: 1.8994 MB) Data Comp: Off Server Time: 2024-04-29 00:47:12 UTC
Valid HTML 5 and Valid CSS