I suppose I could contact Atkin, Grant & Lang about obtaining a blank and have a good gunsmith fit it up. I do not recall a tight hull fit in the chamber that would have stressed the extractor so I am puzzled as to why it broke the way it did.
I was shooting clays one morning in my old side by side. The shells i was using were those horrible cheap eleys with the black case and chinese writing on the box
. Anyway after shooting a pair i opened the gun, one barrel ejected and the other didn't.
The spent shell was out about an inch and wedged tight in the barrel. The ejector was broken. I was going to tig weld it myself or make a new one from scratch, but a friend insisted he knew someone who would fix it for me. He did a so-so job.
