Ted,
We are all thrilled to again hear how much you love disc set strikers and hate strikers integral with the hammer. We are also happy for you that your 10 year old son can remove the disc set strikers from your Uggy. We should all be so lucky!
If you have followed this thread & others on the same subject you should realize by now that disc set strikers can often be very difficult to remove no matter how many pins the tool has or how carefully the tool is fitted & since most higher grade guns usually have index marks on the striker disc & breech face & or locking screws I don't think most discs are stuck because they were over tightened by Bubba as you have indicated before.
Does it say anything to you that the Menck tool & others are set up to use a 3/8" or 1/2" socket or box end wrench?
I gave the gent a suggestion on a tool. I took a picture of it, so that he could perhaps duplicate it. The design is rather clever, with the pins coming to rest in three sets of holes, rather than just one hole for each pin. The right tools make a huge difference. Threaded bits can and do get stuck, good maintenance can correct most of that.
I have no tools that require a 1/2 socket drive for my guns, bicycles, or, my wrist watches. I'll guess things are as they should be, here.
How, exactly, did your post help the OP in any way?
Best,
Ted
