doublegunshop.com - home Forums General Discussion German & Austrian Sporting Guns @ doublegunshop.com Drilling dbl 16 X 10.7MM

May
S	M	T	W	T	F	S
			1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29	30	31

Who's Online Now

2 members (LeFusil, susjwp), 402 guests, and 6 robots.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums10

Topics38,520

Posts545,761

Members14,419

Most Online1,344
Apr 29th, 2024

Print Thread

Re: Drilling dbl 16 X 10.7MM Big Redneck #392445 02/01/15 03:56 PM
Joined: Jan 2015 Posts: 23 Big Redneck OP Boxlock
OP Big Redneck Boxlock Joined: Jan 2015 Posts: 23	Another interesting fact, note the pins on either side of the top lever that indicate if a barrel is cocked, the one pin by itself on the left is for the rifle barrel and the 2 on the right indicate the shotgun barrels.

Entire Thread
Subject	Posted By	Posted
Drilling dbl 16 X 10.7MM	Big Redneck	01/31/15 03:23 PM
Re: Drilling dbl 16 X 10.7MM	ellenbr	01/31/15 04:02 PM
Re: Drilling dbl 16 X 10.7MM	ellenbr	01/31/15 04:07 PM
Re: Drilling dbl 16 X 10.7MM	Gunwolf	01/31/15 04:32 PM
Re: Drilling dbl 16 X 10.7MM	ellenbr	01/31/15 04:34 PM
Re: Drilling dbl 16 X 10.7MM	Gunwolf	01/31/15 04:36 PM
Re: Drilling dbl 16 X 10.7MM	sharps4590	01/31/15 04:37 PM
Re: Drilling dbl 16 X 10.7MM	Gunwolf	01/31/15 04:40 PM
Re: Drilling dbl 16 X 10.7MM	ellenbr	01/31/15 04:54 PM
Re: Drilling dbl 16 X 10.7MM	Gunwolf	01/31/15 06:37 PM
Re: Drilling dbl 16 X 10.7MM	Big Redneck	01/31/15 09:18 PM
Re: Drilling dbl 16 X 10.7MM	Gunwolf	01/31/15 09:47 PM
Re: Drilling dbl 16 X 10.7MM	skeettx	01/31/15 10:38 PM
Re: Drilling dbl 16 X 10.7MM	ellenbr	02/01/15 01:17 PM
Re: Drilling dbl 16 X 10.7MM	Gunwolf	02/01/15 01:34 PM
Re: Drilling dbl 16 X 10.7MM	ellenbr	02/01/15 01:56 PM
Re: Drilling dbl 16 X 10.7MM	ellenbr	02/01/15 02:04 PM
Re: Drilling dbl 16 X 10.7MM	Big Redneck	02/01/15 02:47 PM
Re: Drilling dbl 16 X 10.7MM	ellenbr	02/01/15 02:56 PM
Re: Drilling dbl 16 X 10.7MM	Big Redneck	02/01/15 03:03 PM
Re: Drilling dbl 16 X 10.7MM	sharps4590	02/01/15 05:10 PM
Re: Drilling dbl 16 X 10.7MM	Big Redneck	02/01/15 06:55 PM
Re: Drilling dbl 16 X 10.7MM	Big Redneck	02/01/15 07:48 PM
Re: Drilling dbl 16 X 10.7MM	Big Redneck	02/01/15 07:56 PM
Re: Drilling dbl 16 X 10.7MM	Der Ami	02/01/15 07:58 PM
Re: Drilling dbl 16 X 10.7MM	Big Redneck	02/01/15 08:41 PM
Re: Drilling dbl 16 X 10.7MM	ellenbr	02/01/15 07:59 PM
Re: Drilling dbl 16 X 10.7MM	ellenbr	02/01/15 09:22 PM
Re: Drilling dbl 16 X 10.7MM	ellenbr	02/01/15 09:30 PM
Re: Drilling dbl 16 X 10.7MM	ellenbr	02/01/15 09:56 PM
Re: Drilling dbl 16 X 10.7MM	Big Redneck	02/02/15 03:59 AM
Re: Drilling dbl 16 X 10.7MM	skeettx	02/02/15 02:33 AM
Re: Drilling dbl 16 X 10.7MM	skeettx	02/02/15 04:18 AM
Re: Drilling dbl 16 X 10.7MM	Big Redneck	02/02/15 12:26 PM
Re: Drilling dbl 16 X 10.7MM	ellenbr	02/02/15 12:55 PM
Re: Drilling dbl 16 X 10.7MM	ellenbr	02/02/15 01:46 PM
Re: Drilling dbl 16 X 10.7MM	Big Redneck	02/02/15 02:17 PM
Re: Drilling dbl 16 X 10.7MM	ellenbr	02/02/15 02:27 PM
Re: Drilling dbl 16 X 10.7MM	ellenbr	02/02/15 02:33 PM
Re: Drilling dbl 16 X 10.7MM	Big Redneck	02/02/15 03:25 PM
Re: Drilling dbl 16 X 10.7MM	ellenbr	02/02/15 03:30 PM
Re: Drilling dbl 16 X 10.7MM	ellenbr	02/02/15 03:35 PM
Re: Drilling dbl 16 X 10.7MM	Big Redneck	02/02/15 03:55 PM
Re: Drilling dbl 16 X 10.7MM	ellenbr	02/02/15 04:04 PM
Re: Drilling dbl 16 X 10.7MM	ellenbr	02/02/15 04:19 PM
Re: Drilling dbl 16 X 10.7MM	Der Ami	02/02/15 05:07 PM
Re: Drilling dbl 16 X 10.7MM	Big Redneck	02/02/15 06:04 PM
Re: Drilling dbl 16 X 10.7MM	Big Redneck	02/02/15 08:57 PM
Re: Drilling dbl 16 X 10.7MM	Big Redneck	02/02/15 09:34 PM
Re: Drilling dbl 16 X 10.7MM	ellenbr	02/02/15 05:06 PM
Re: Drilling dbl 16 X 10.7MM	ellenbr	02/02/15 11:19 PM
Re: Drilling dbl 16 X 10.7MM	Der Ami	02/03/15 04:00 PM
Re: Drilling dbl 16 X 10.7MM	montenegrin	02/03/15 05:09 PM
Re: Drilling dbl 16 X 10.7MM	Der Ami	02/03/15 09:59 PM
Re: Drilling dbl 16 X 10.7MM	ellenbr	02/04/15 12:31 AM
Re: Drilling dbl 16 X 10.7MM	Big Redneck	02/04/15 03:16 AM
Re: Drilling dbl 16 X 10.7MM	ellenbr	02/04/15 06:24 AM
Re: Drilling dbl 16 X 10.7MM	sharps4590	02/04/15 12:48 PM
Re: Drilling dbl 16 X 10.7MM	ellenbr	02/05/15 01:07 PM
Re: Drilling dbl 16 X 10.7MM	ellenbr	02/05/15 01:20 PM
Re: Drilling dbl 16 X 10.7MM	Der Ami	02/05/15 11:09 PM
Re: Drilling dbl 16 X 10.7MM	ellenbr	02/06/15 12:06 AM
Re: Drilling dbl 16 X 10.7MM	sharps4590	02/06/15 12:21 AM
Re: Drilling dbl 16 X 10.7MM	ellenbr	02/06/15 12:42 AM
Re: Drilling dbl 16 X 10.7MM	Big Redneck	02/06/15 03:16 PM
Re: Drilling dbl 16 X 10.7MM	Der Ami	02/06/15 04:52 PM
Re: Drilling dbl 16 X 10.7MM	Big Redneck	02/11/15 07:46 PM
Re: Drilling dbl 16 X 10.7MM	skeettx	02/11/15 08:33 PM
Re: Drilling dbl 16 X 10.7MM	Big Redneck	02/11/15 09:57 PM
Re: Drilling dbl 16 X 10.7MM	ellenbr	02/11/15 08:41 PM
Re: Drilling dbl 16 X 10.7MM	Der Ami	02/11/15 09:53 PM
Re: Drilling dbl 16 X 10.7MM	Big Redneck	02/11/15 09:54 PM
Re: Drilling dbl 16 X 10.7MM	skeettx	02/11/15 10:25 PM
Re: Drilling dbl 16 X 10.7MM	Big Redneck	02/12/15 02:38 AM
Re: Drilling dbl 16 X 10.7MM	skeettx	02/12/15 12:29 PM
Re: Drilling dbl 16 X 10.7MM	Big Redneck	02/16/15 04:02 PM
Re: Drilling dbl 16 X 10.7MM	Slonus	04/19/15 08:12 PM
Re: Drilling dbl 16 X 10.7MM	Slonus	04/23/15 04:21 PM

Link Copied to Clipboard

Updated every minute of everyday!

Copyright (c) 1993 - 2024 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 0.354s Queries: 18 (0.333s) Memory: 0.9562 MB (Peak: 1.8994 MB) Data Comp: Off Server Time: 2024-05-12 19:25:10 UTC
Valid HTML 5 and Valid CSS