I'll update you when I have a finished stock to report on - Just got back from Norway and too busy at work to do much with guns this month - managing to get my Lee grouse gun prepared but not ready for oil yet. Still raising dents and clewaning out checkering etc.

The redo oil works fine - just did an Edwinson Green - came up very nice. All the black figure darkened well and the red coloured the rest of the wood in fine contrast. The finish i Used was the Napier stock oil. This is good stuff, my only criticism ofit is that it needs alot of drying time between very fine coats if the finished result is to be hard enough.

The finish always shines up well, but the hardness at the end is where the drying is critical.