No, why wreck the gun?

No, the 9.3 dies will not size the ENTIRE case for the .358 bullet you will need. And the recut chamber will really wear out the brass.

Now for the 9x72R do you have the Sauer variety or the Standard variety?

Stay with the 9mm chamber. AND 35 Remington bullets (projectiles) are much cheaper. And for FUN you can shoot light 125 grain 357 pistol bullets.

For reloading, all you have to do is size the virgin 9.3x72R brass in a 9x72R full length sizing die and load normally from there, not an issue.


http://www.jgsales.com/product_info.php/...cts_id/4402?SID
Mike

Last edited by skeettx; 09/04/11 03:56 PM.
USAF RET 1971-95 [Linked Image from jpgbox.com]