I'm getting frustrated trying to get the cast out of the chamber. I'm using Cerro-safe from Brownells, it melts at 160-180 degrees F. Every time I use it I've had to apply heat to the outside of the chamber to get it out, which leaves me with a useless casting. Are there a few tricks that I can use?
I picked up a Imman. Meffert, Suhl, a few months back, 16x16x 9mmx72. the rifle bsrrel is stamped 118/35, 9mm 72 d. A 9.3x72 from 4 different manufactures will not slide all the way in, about 10mm sticks out. I think that it is the old 9.3x72 Sauer, but I would like to have a casting of it. Any suggestions will help, I'm stumped.
Thanks, Jerry
Last edited by Jerry Mouer; 09/06/11 04:11 PM.
