S |
M |
T |
W |
T |
F |
S |
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
|
|
|
|
|
Forums10
Topics38,481
Posts545,237
Members14,410
|
Most Online1,335 Apr 27th, 2024
|
|
|
Joined: Jun 2007
Posts: 40
Sidelock
|
OP
Sidelock
Joined: Jun 2007
Posts: 40 |
Got a ding on my G grade twist steel barrels and at some point I would like to have the barrels refinished. I'm curious if this damage can be repaired but will leave a blemish that may require blueing the barrels? or can it be acceptably repaired comsetically and allow the barrels to be refinished as original and retain the twist pattern? Thanks! http://i182.photobucket.com/albums/x300/ggwillia/barrelding.jpg?t=1194911205
|
|
|
|
Joined: Oct 2007
Posts: 79
Sidelock
|
Sidelock
Joined: Oct 2007
Posts: 79 |
The gunsmith will need to see the dent. If the dent is small , blueing is not required. It could be repaired without reblueing it. If the dent is sharp, that s another story.
g gournet
|
|
|
|
Joined: Jan 2002
Posts: 5,089 Likes: 36
Sidelock
|
Sidelock
Joined: Jan 2002
Posts: 5,089 Likes: 36 |
That's really not a ding, is it? It looks more like a pockmark, a small piece has fallen out of the barrel. A ding would be impressed and could be raised but this doesn't look like material was moved into the barrel, it looks missing.
FWIW I have a damascus barreled English gun with something similar, but much smaller, just ahead of the chamber and it passed reproof without a problem, in fact they asked me if I wanted it proofed for 2-3/4".
My problem lies in reconciling my gross habits with my net income. - Errol Flynn
|
|
|
|
Joined: Jun 2007
Posts: 40
Sidelock
|
OP
Sidelock
Joined: Jun 2007
Posts: 40 |
That is correct Rob, there is a divot of material missing. I currently shoot the gun with low pressure loads so the repair would be purely cosmetic. Would this material have to be replaced with some sort of welding?
|
|
|
|
Joined: Jan 2002
Posts: 5,089 Likes: 36
Sidelock
|
Sidelock
Joined: Jan 2002
Posts: 5,089 Likes: 36 |
I imagine that would be the only way to do it but I don't know if that can be done to damascus. TIG welding is what most use to fill pitting on receivers and such, perhaps it can be done to damascus. Yours looks to be in the chamber area so make sure whoever you get knows their stuff.
My problem lies in reconciling my gross habits with my net income. - Errol Flynn
|
|
|
|
Joined: Dec 2001
Posts: 6,271 Likes: 202
Sidelock
|
Sidelock
Joined: Dec 2001
Posts: 6,271 Likes: 202 |
When refinishing Damascus barrels like yours, the pattern should probably be black and white. My experience is the black part of the refinishing tends to hide some pocks or pits and you will have to look twice to see it. Your barrels seem to have quite a bit of finish on them, so if they were mine, I would do nothing.
|
|
|
|
Joined: Feb 2004
Posts: 13,879 Likes: 15
Sidelock
|
Sidelock
Joined: Feb 2004
Posts: 13,879 Likes: 15 |
From what I see in the pic, it appears to me that the barrel suffered a good whack on a pointy rock or something, the "dent" portion of the damage may have raised and the remaining crater edges were filed down flush, leaving the "divot". That's my longdistance picture assessment anyway.
From the looks of the barrel finish in this area, nearly no original finish remains, just some patina. It also appears that the divot is very shallow. I doubt that removing it by filing will significantly reduce strength. If it is very shallow, I wouldn't bother with the TIG welding, just have whoever refinishes the barrels drawfile it out.
|
|
|
|
Joined: Sep 2006
Posts: 36
Junior Member
|
Junior Member
Joined: Sep 2006
Posts: 36 |
I would contact Keith Kearcher, Bend, OR. Some years ago he repaied a dent in a Parker D grade damascus for us and did an unbelieveable job.
|
|
|
|
Joined: Jun 2007
Posts: 40
Sidelock
|
OP
Sidelock
Joined: Jun 2007
Posts: 40 |
Got home this evening and measured the depth of the dent with my micrometer and it's about .020 inches deep. The dent is 2.5 inches from the face of the chambers. I'll have someone look at it of course but do you think this is too deep to file away? BTW, I think you nailed what happened to it Chuck. After looking at it closer it looks like it has been filed it down.
|
|
|
|
Joined: Dec 2001
Posts: 6,271 Likes: 202
Sidelock
|
Sidelock
Joined: Dec 2001
Posts: 6,271 Likes: 202 |
I think Keith is a good answer to this . 2 1/2" in front of the chamber is an odd place to have a dent as that is almost the thickest part of the barrel. Maybe others see it, but I don't see , in the photo, the evidence of filing.
|
|
|
|
|