|
S |
M |
T |
W |
T |
F |
S |
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
|
|
|
|
|
8 members (LGF, eightbore, Ian Forrester, David Kinton, buckstix, 1 invisible),
1,254
guests, and
6
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums10
Topics38,481
Posts545,238
Members14,410
|
Most Online1,344 Apr 29th, 2024
|
|
|
Joined: Aug 2018
Posts: 305 Likes: 7
Sidelock
|
OP
Sidelock
Joined: Aug 2018
Posts: 305 Likes: 7 |
I have a right ejector that the small pin has broke off flush with the back of the ejector. How were these originally installed? I am assuming another pin could be installed for a repair. How should this be done?
Also did the firing pins in this gun vary in size by comparison to the 20 or 12 ga? I also have a broken firing pin on the same side as the broken ejector pin.
I picked this gun up on the broker very reasonable. I do not think the seller could open the gun (the firing pin was stuck too far out to let the gun open beyond just a little bit)and as such he had very little info and marginal pics. I saw just enough and had to give little enough to take a chance and picked up a real nice gun with excellent barrels (in/out and sound), good wood and except the two issues above, everything else looks great and original.
Many thanks
Travis
Last edited by Travis S; 07/15/19 08:34 PM.
|
|
|
|
Joined: Feb 2006
Posts: 3,728 Likes: 50
Sidelock
|
Sidelock
Joined: Feb 2006
Posts: 3,728 Likes: 50 |
The firing pins are all the same. The early bushed firing pins were made in three different sizes, but that was for a Regular frame gun.
Travis in reading your post again, you are talking about the split extractor stem that has a broken pin. They are pressed in and you should be able to see the pin showing faintly on the outside where it was ground.
Last edited by David Williamson; 07/15/19 09:08 PM.
David
|
|
|
|
Joined: Aug 2018
Posts: 305 Likes: 7
Sidelock
|
OP
Sidelock
Joined: Aug 2018
Posts: 305 Likes: 7 |
It is not the main split stem but the smaller pin. I will look a little closer. I figured it was not too difficult a fix.
I have extra firing pins so I should be up and running in short order.
Many thanks
Travis
|
|
|
|
Joined: Nov 2018
Posts: 98 Likes: 8
Sidelock
|
Sidelock
Joined: Nov 2018
Posts: 98 Likes: 8 |
The pin was threaded in. you would have to drill out any remains of the old pin (without damaging the threads) and make a new pin and thread it.
|
|
|
|
Joined: Jul 2012
Posts: 4,463 Likes: 207
Sidelock
|
Sidelock
Joined: Jul 2012
Posts: 4,463 Likes: 207 |
Travis, If you have or can find a left hand drill small enough to miss the thread, it may back the pin out. Mike
|
|
|
|
Joined: Aug 2018
Posts: 305 Likes: 7
Sidelock
|
OP
Sidelock
Joined: Aug 2018
Posts: 305 Likes: 7 |
I have some micro drills bits so off to the races.
Thanks to all
|
|
|
|
Joined: Feb 2008
Posts: 11,343 Likes: 390
Sidelock
|
Sidelock
Joined: Feb 2008
Posts: 11,343 Likes: 390 |
I have some micro drills bits so off to the races.
Thanks to all Don't forget to start with a well centered dimple made with a sharp center punch. Small drill bits "walk" very easily. Use high rpm and low pressure. If the broken surface is very uneven, it often helps to use a carbide dental burr to smooth things up. Ask your dentist to save some used burrs for you. This is the kind of job that makes me glad I bought a Unimat lathe-mill-drill years ago.
A true sign of mental illness is any gun owner who would vote for an Anti-Gunner like Joe Biden.
|
|
|
|
Joined: Jan 2002
Posts: 13,154 Likes: 1152
Sidelock
|
Sidelock
Joined: Jan 2002
Posts: 13,154 Likes: 1152 |
If you can find a left hand center drill in the size you need it will be well worth the cost, even if you never use it again. They don't wander.
SRH
May God bless America and those who defend her.
|
|
|
|
Joined: Jan 2002
Posts: 13,154 Likes: 1152
Sidelock
|
Sidelock
Joined: Jan 2002
Posts: 13,154 Likes: 1152 |
Here ya' go, Travis. Great company to do business with. Ship very quickly. https://www.mscdirect.com/product/details/01043017 SRH
May God bless America and those who defend her.
|
|
|
|
Joined: Aug 2018
Posts: 305 Likes: 7
Sidelock
|
OP
Sidelock
Joined: Aug 2018
Posts: 305 Likes: 7 |
The steady pin is driven in but the thing we may all been missing is that there is a second pin driven across the steady pin from the side of the ejector in order to hold it in place. This has to be drilled out first as it is a blind pin and does not go all the way across the ejector I do not think.
Under magnification I can see where the second pin is actually breaking through the face of the ejector by me trying to whack the steady pin out without first removing the second pin.
OH well it had to happen. The ejector is not beyond repair but I imagine some tig is the future.
Anyone want to sell me a spare 16 bore LC Smith FW right side ejector so I can at least get up and running for the dove opener?
Thanks
Travis
|
|
|
|
|
|