|
S |
M |
T |
W |
T |
F |
S |
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
|
|
|
|
|
Forums10
Topics38,468
Posts545,134
Members14,409
|
Most Online1,258 Mar 29th, 2024
|
|
|
Joined: Aug 2008
Posts: 960 Likes: 12
Sidelock
|
OP
Sidelock
Joined: Aug 2008
Posts: 960 Likes: 12 |
Anyone have a solid recipe to reload 12ga 2.52" RST hulls with? Just a standard 1oz, 7k psi +/- lead load, for use in a damascus Lefever.
|
|
|
|
Joined: Dec 2001
Posts: 2,961 Likes: 9
Sidelock
|
Sidelock
Joined: Dec 2001
Posts: 2,961 Likes: 9 |
From the hardcover Hodgdon shotshell data manual. shortened Remington Premier,WW209 primer, wad WAA12R, 20.8 gr universal, 1oz shot= 7300 psi on page 99 of the hardcove manual.
bill
|
|
|
|
Joined: Dec 2001
Posts: 3,964 Likes: 89
Sidelock
|
Sidelock
Joined: Dec 2001
Posts: 3,964 Likes: 89 |
Those are Cheddite straight walled hulls. So any good data for 2 3/4” Cheddite hulls will work fine. If you don’t adjust the wad height the hulls might have to be roll crimped.
When an old man dies a library burns to the ground. (Old African proverb)
|
|
|
|
Joined: Jan 2009
Posts: 768 Likes: 19
Sidelock
|
Sidelock
Joined: Jan 2009
Posts: 768 Likes: 19 |
mark,
Look at Allaint's and Hogdon's web sites. There are many on the Hogdons site to choose from. You can also call claybuster: they have some loads listed on their site.
good shooting,
Last edited by susjwp; 05/26/19 07:46 AM.
|
|
|
|
Joined: Aug 2008
Posts: 960 Likes: 12
Sidelock
|
OP
Sidelock
Joined: Aug 2008
Posts: 960 Likes: 12 |
Thanks guys. I found what I was looking for, from an earlier post here by Dr. Bob:
2 1/2" Cheddite (RST) hull Cheddite or Winchester 209 primer 20 grains International Clays powder GU-1222 wad. 1 oz. lead shot/6 fold crimp 1220 FPS@6800 PSI
2 1/2" Cheddite(RST) hull Cheddite or Winchester 209 primer 22 grains IMR PB powder GU-1222 wad 1oz lead shot/6 fold crimp 1225 FPS@7200 PSI
|
|
|
|
Joined: Aug 2008
Posts: 553 Likes: 56
Sidelock
|
Sidelock
Joined: Aug 2008
Posts: 553 Likes: 56 |
Mark,
Hodgdon's reloading site doesn't list a 2.5" cheddite hull in their online loads. They do show a 2 3/4" cheddite hull with basically the same load, but higher pressure. Does anyone know the pressure difference of a 2.5" hull compared to a 2.75" hull?
=== Hodgdon Site Load==== 2.75" Cheddite hull Cheddite 209 primer 20.6 grains International powder GU-1225 wad 1 oz lead shot 1235 fps @7700 PSI =======================
Ken
|
|
|
|
|
|