March
S M T W T F S
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31
Who's Online Now
5 members (Jimmy W, KDGJ, smlekid, Owenjj3, Argo44), 822 guests, and 3 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums10
Topics38,374
Posts544,009
Members14,391
Most Online1,131
Jan 21st, 2024
Previous Thread
Next Thread
Print Thread
Joined: Sep 2013
Posts: 320
Likes: 4
WBLDon Offline OP
Sidelock
OP Offline
Sidelock

Joined: Sep 2013
Posts: 320
Likes: 4
Good Evening.
I have tried searching the web and this site for detailed instructions on how to totally disassemble the action on SXS. It is a striker fired action (no hammers) with extractors. I looked at the firing pins (strikers) when they were relaxed (In fired position) and there seems to still be quite a bit of pressure on the striker springs. I need to remove the strikers to reshape the noses.
Can someone point me to a Video or detailed description on how to totally disassemble the action and maybe a description of the tools or jigs needed.

I beleive the gun was built in the late 50's to early 60's.

Thanks in advance for the help....
WBLDon

Joined: Feb 2002
Posts: 1,850
Likes: 150
Sidelock
***
Offline
Sidelock
***

Joined: Feb 2002
Posts: 1,850
Likes: 150
Probably a Springfield 311 or one of the variants made by Stevens. Riverside 315 was another common one.

The striker fired action SxS from Stevens were older,,they were the Lewis patent actions (1915) and were made up into the early 1930's I believe.

Anyway. to get at the strikers themselves, first you have to remove pretty much everything behind them in the action/frame.
Triggers, safety, sears, top lever rod and spring, top lever, ect.
Clean out the frame,,strip it of parts and be left with just the two strikers w/springs held in the frame by their cross frame support inside,,wall to wall.
The support is held in place by the pin thru the frame at the lower corner of the frame on sides.

A sturdy steel dowel pin center support inside further supports the cross frame piece (which is just a steel stamping). That dowel support pin is pinned to the lower tang of the one piece frame.
Lots of pins,,but it makes for easy disassembly.

There is some main spring tension on the cross plate even when the strikers are down/uncocked. But when disassembling the mess by knocking out the pins, there is not all that much spring tension that things go flying.
It's usually easier to drive a long slender punch through and push the long frame support pin out first,,leaving the punch in place.
Then remove the dowel pin support.
Then go back and 'pull the pin' punch on the frame support and let the assembly back off and out of the frame.

Getting the springs back in again can be tricky. But using either a small c-clamp in the center of the support and against the front of the breech face to draw the springs and plate down to get the punch back in place works.
We used to pre-load both strikers and lock them in position with a small grip-lock pliers on each striker end,,plate in betw. Then set the assembly in the gun and westle the thing gently into position to get the punch through to line things up. Then tap the pin itself back through.
The cross plate will tilt back some when the pliers or clamp is taken off. But the plate is secure and you just have to push the plate back into upright position to replace the support dowel and re-pin.

Simple..


Here's a video about taking one apart.
It's pretty helpfull in getting the frame parts out. BUT the guy doesn't bother to touch the strikers at all.
https://www.youtube.com/watch?v=TuvIUr1uctw

There is however some very nice closeup pics of the stripped frame w/strikers and support plate & dowel iin position.
At 9.15 into the 51min video there is a good shot of what you will be dealing with.
It ain't hard to do,,they did it 100 yrs ago..

Joined: Sep 2013
Posts: 320
Likes: 4
WBLDon Offline OP
Sidelock
OP Offline
Sidelock

Joined: Sep 2013
Posts: 320
Likes: 4
Kutter, Thank you very much this is what I was looking for.

Respectfully,
WBLDon


Link Copied to Clipboard

doublegunshop.com home | Welcome | Sponsors & Advertisers | DoubleGun Rack | Doublegun Book Rack

Order or request info | Other Useful Information

Updated every minute of everyday!


Copyright (c) 1993 - 2024 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)
Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 0.036s Queries: 21 (0.018s) Memory: 0.8037 MB (Peak: 1.8988 MB) Data Comp: Off Server Time: 2024-03-28 22:47:08 UTC
Valid HTML 5 and Valid CSS