|
S |
M |
T |
W |
T |
F |
S |
|
|
|
|
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
|
|
|
|
|
|
|
2 members (Edm1, Reidy),
284
guests, and
16
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums10
Topics38,572
Posts546,458
Members14,424
|
Most Online1,344 Apr 29th, 2024
|
|
|
Joined: Oct 2015
Posts: 593
Sidelock
|
OP
Sidelock
Joined: Oct 2015
Posts: 593 |
I am feeling good today because I had a win with the internal tread in the bottom of the top lever of my LC Smith. This gun has been worked on by unmentionables & I am in the process of trying to reverse up to a place that I can now repair it properly. The top lever screw in it was a little coarse threaded self tapper just smaller than the thread size of the 4-40 screw that is original.
I naturally thought the worse for the situation but after inspecting under magnification & a bit of picking at the thread my hope grew. The self tapper was just too small to pick up the 4-40 threads so the unmentionable put some hardening compound in the hole & ran the self tapper in. I was able to heat & pick this stuff out & after a blow out with WD40 & chasing the tread with a 4-40 tap it accepted a 4-40 screw perfectly.
Now my conundrum is to find the correct, or a workable screw to complete the repair. The ones I can find do not have a large enough head diameter to work correctly & I may yet have to make one. But that is all better than having that female thread in the top lever all screwed up. O.M
|
|
|
|
Joined: Jan 2009
Posts: 391 Likes: 11
Sidelock
|
Sidelock
Joined: Jan 2009
Posts: 391 Likes: 11 |
In an ironic way, the "fixer" did a great job. Not having the correct part, they did a repair that did minimal damage. I wish they were all that way......
Dumb, but learning...Prof Em, BSc(ME), CAE (FYI)
|
|
|
|
Joined: Jun 2008
Posts: 5,539 Likes: 170
Sidelock
|
Sidelock
Joined: Jun 2008
Posts: 5,539 Likes: 170 |
USAF RET 1971-95
|
|
|
|
Joined: Feb 2011
Posts: 1,405
Sidelock
|
Sidelock
Joined: Feb 2011
Posts: 1,405 |
I will tell you from experience that the screw that numrich sells is not competely correct. They are just a modern machine screw that is similar to the smith top lever screw. The head is no where near the right diameter and ghe threads are close enough to work, but not exact.
B.Dudley
|
|
|
|
Joined: Oct 2015
Posts: 593
Sidelock
|
OP
Sidelock
Joined: Oct 2015
Posts: 593 |
Yes oldstarfire, ironic indeed. If it was thoughtfully done that way as to not ruin things we will never know.
B. Dudley, thank you for that confirmation. I am finding that to be the case with every available screw. That outside head diam is needed as it is a part of bearing & alignment. O.M
|
|
|
|
Joined: Feb 2011
Posts: 1,405
Sidelock
|
Sidelock
Joined: Feb 2011
Posts: 1,405 |
I may have a few good ones here if you need one.
B.Dudley
|
|
|
|
Joined: Oct 2015
Posts: 593
Sidelock
|
OP
Sidelock
Joined: Oct 2015
Posts: 593 |
Thank you for that kind offer Mr Dudley. P.M. sent. O.M
|
|
|
|
Joined: Feb 2002
Posts: 2,859
Sidelock
|
Sidelock
Joined: Feb 2002
Posts: 2,859 |
I'm not certain but I seem to remember that LC Smith typewriters used screws that could often be used in their firearms.
Steve
Approach life like you do a yellow light - RUN IT! (Gail T.)
|
|
|
|
Joined: Jan 2002
Posts: 7,704 Likes: 103
Sidelock
|
Sidelock
Joined: Jan 2002
Posts: 7,704 Likes: 103 |
I'm not certain but I seem to remember that LC Smith typewriters used screws that could often be used in their firearms.
Steve An old manual Smith typewriter is probably rarer that an Elsie these days...Geo
|
|
|
|
Joined: Oct 2015
Posts: 593
Sidelock
|
OP
Sidelock
Joined: Oct 2015
Posts: 593 |
An old manual Smith typewriter is probably rarer that an Elsie these days...Geo
True, Geo. At least here in Australia. Not sayin I bin everywhere man, but my Elsie is the only one I have ever seen or heard of. Talking to an American trained gunsmith in this town yesterday & he has never seen or heard of LC Smith guns before seeing mine yesterday. O.M
|
|
|
|
|
|