|
S |
M |
T |
W |
T |
F |
S |
|
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
31
|
|
|
Forums10
Topics38,527
Posts545,851
Members14,420
|
Most Online1,344 Apr 29th, 2024
|
|
|
Joined: Mar 2002
Posts: 7,736 Likes: 493
Sidelock
|
Sidelock
Joined: Mar 2002
Posts: 7,736 Likes: 493 |
If a tang screw adjustment corrects this you either have a stock slightly over or under inletted. Under is easier to fix, just inlet it more. Over inlet can be a real problem if the wood is not slightly proud of the metal. Never figured out how to stretch wood more.
I had a Sterlingworth pin gun with a miller trigger which had been restocked. It had both wood interference problems and was over inlet. Easy way to fix it was to just restock it. Well not the easy way but the one I took. You could try the tang screw approach first. Or even measure the old stock and new stock. Most likely you have a very slight wood to metal interference problem. Plain terms, it hits somewhere it should not. Have you smoked it and looked for any spots?
|
|
|
|
Joined: Feb 2002
Posts: 14,143 Likes: 202
Sidelock
|
Sidelock
Joined: Feb 2002
Posts: 14,143 Likes: 202 |
Dewey, my friend, could you elaborate a bit on the Purdey statement? I agree with your statement, but I don't know what the alternatives are.
|
|
|
|
Joined: Mar 2002
Posts: 3,100 Likes: 339
Sidelock
|
Sidelock
Joined: Mar 2002
Posts: 3,100 Likes: 339 |
This is right up there with other mythology like: - Beads serve any purpose other that tradition/decoration
A reference point for the subconscious vision as to where the muzzles are in relation to the target to discern lead? JR
Be strong, be of good courage. God bless America, long live the Republic.
|
|
|
|
Joined: Mar 2009
Posts: 2,025 Likes: 51
Sidelock
|
Sidelock
Joined: Mar 2009
Posts: 2,025 Likes: 51 |
deleted
Last edited by old colonel; 06/11/18 08:25 PM.
Michael Dittamo Topeka, KS
|
|
|
|
Joined: May 2004
Posts: 614
Sidelock
|
Sidelock
Joined: May 2004
Posts: 614 |
Will, my comment wasn't directed at you but at the many self-styled experts that believe it's perfectly normal to "adjust" a breech, hand or lockplate screw in order to make a gun function and then simply leave the screws where they are when/if the gun actually does start to work. I've been down this road before but I won't go down it any more as there are more than enough "experts" here. It seems that ignorance is a very hard thing to admit.
Dewey, No worries, my apologies for making it seem that I was reading into it in that way. I like a couple of your solutions to reduce the chance of tampering, cut ultra thin slots or hide the bloody screws altogether!
|
|
|
|
|
|