September
Su M Tu W Th F Sa
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
Who's Online
10 registered (Fiorina, fallschirmjaeger, GaryD007, bladeswitcher, fallingblock, 1 invisible), 135 Guests and 8 Spiders online.
Key: Admin, Global Mod, Mod
Forum Stats
13203 Members
9 Forums
30570 Topics
409414 Posts

Max Online: 462 @ 08/05/16 08:13 PM
Page 2 of 2 < 1 2
Topic Options
#489694 - 09/09/17 09:50 PM Re: Lefever G top lever spring [Re: B. Graham]
B. Graham Offline
Sidelock

Registered: 08/07/13
Posts: 339
Loc: Durham NC
Resolved with a top lever spring from another gun, shaped to fit. There's a camming piece that attaches to the top lever inside the frame that presses on the spring, and also activates the safety.

Top
#489990 - 09/13/17 10:05 AM Re: Lefever G top lever spring [Re: B. Graham]
B. Graham Offline
Sidelock

Registered: 08/07/13
Posts: 339
Loc: Durham NC
To close this topic out:

In my frame there is a small hole for the pin that captures the trip and trip spring.

Immediately below it there is a hole and divot further in the frame for a pin that helps retain the closed end of the top lever spring. You can get away with out it, since the the camming piece helps retain the top lever spring in it's slot, but having the pin at the other end helps stabilize the top lever and it feel smoother operating it.

Then of course below this is the keyed hole for the pin that passes through the hammers and cocking arm.

If anyone wants a picture, send me a PM with an e-mail address. I haven't picked a new place to host pictures from since leaving Photobucket.

Top
Page 2 of 2 < 1 2



doublegunshop.com home | Welcome | Sponsors & Advertisers | DoubleGun Rack | Doublegun Book Rack

Order or request info | Other Useful Information

Updated every minute of everyday!


Copyright (c) 1993 - 2017 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.