I thought of adding this to Mr. Lister's fine post on the Model 21 he engraved for a client, but didn't want to hijack. I had always wanted engraver and friend, Sam Welch, to do a gun for me. Some decades ago I found a Winchester 21 , 16 ga. , Skeet grade at a gun show. It seemed to be the perfect canvas for Sam to engrave. I wanted oak leaves, some small gold birds, etc and I asked Sam to round off the "bolsters" [is that the right word] on the sides of the frame. I had always thought the Winchester shaping of these was not the best. Here are a couple of pictures. Sorry my first picture is a bit fuzzy, but you can see the detail in the larger than lifesize second picture.