Forums Calendar Active Threads
May
S M T W T F S
1 2 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29 30 31
Who's Online Now
2 members (earlyriser, R. Glenz), 993 guests, and 5 robots.
Key: Admin, Global Mod, Mod
Forum Statistics
Forums10
Topics38,513
Posts545,667
Members14,419
Most Online1,344
Apr 29th, 2024
Previous Thread
Next Thread
Print Thread
Broken Ejector
#441936 04/18/16 07:42 AM
Joined: May 2012
Posts: 68
Maud Island, Georgian Bay
shortround Offline OP
Sidelock
OP Offline
shortround
Sidelock

Joined: May 2012
Posts: 68
Maud Island, Georgian Bay
Does anyone know of a gunsmith that can machine, turn and grind) and fit a new ejector on an older H & H gun?

H & H, London, can deliver a very rough forging, but a lot of work would still need to be done to fit the ejector to the gun.
Re: Broken Ejector
shortround #441957 04/18/16 11:20 AM
Joined: May 2014
Posts: 90
British Columbia
Roalco Offline
Sidelock
Offline
Roalco
Sidelock

Joined: May 2014
Posts: 90
British Columbia
Certainly Stuart Newby in BC can do it, but I believe there are a couple of British gunsmiths in Ontario that would be closer to you. Nick Mackinson and Stephen Milton spring to mind.
Re: Broken Ejector
Roalco #441992 04/18/16 05:42 PM
Joined: Jul 2012
Posts: 4,464
Likes: 207
East Alabama
Der Ami Offline
Sidelock
**
Offline
Der Ami
Sidelock
**

Joined: Jul 2012
Posts: 4,464
Likes: 207
East Alabama
For an ejector( if it is "older" is it an extractor?)I wouldn't be too hesitant to let a "local guy" do it. If he makes a royal mess out of it, it will not hurt the gun. You could simply trash (or frame) the new ejector.
Mike
Re: Broken Ejector
Der Ami #442008 04/18/16 08:20 PM
Joined: Feb 2004
Posts: 13,880
Likes: 16
Torrance, CA
Chuck H Offline
Sidelock
***
Offline
Chuck H
Sidelock
***

Joined: Feb 2004
Posts: 13,880
Likes: 16
Torrance, CA
Originally Posted By: Der Ami
For an ejector( if it is "older" is it an extractor?)I wouldn't be too hesitant to let a "local guy" do it. If he makes a royal mess out of it, it will not hurt the gun. You could simply trash (or frame) the new ejector.
Mike


Never underestimate the ability of a hack to screw up a good gun.

Link Copied to Clipboard
Forum Rules · Mark All Read Contact Us · Forum Help · doublegunshop.com - home

doublegunshop.com home | Welcome | Sponsors & Advertisers | DoubleGun Rack | Doublegun Book Rack

Order or request info | Other Useful Information

Updated every minute of everyday!

Copyright (c) 1993 - 2024 doublegunshop.com. All rights reserved. doublegunshop.com - Bloomfield, NY 14469. USA These materials are provided by doublegunshop.com as a service to its customers and may be used for informational purposes only. doublegunshop.com assumes no responsibility for errors or omissions in these materials. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT-ABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. doublegunshop.com further does not warrant the accuracy or completeness of the information, text, graphics, links or other items contained within these materials. doublegunshop.com shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use of these materials. doublegunshop.com may make changes to these materials, or to the products described therein, at any time without notice. doublegunshop.com makes no commitment to update the information contained herein. This is a public un-moderated forum participate at your own risk.

Note: The posting of Copyrighted material on this forum is prohibited without prior written consent of the Copyright holder. For specifics on Copyright Law and restrictions refer to: http://www.copyright.gov/laws/ - doublegunshop.com will not monitor nor will they be held liable for copyright violations presented on the BBS which is an open and un-moderated public forum.

Powered by UBB.threads™ PHP Forum Software 7.7.5
(Release build 20201027)
Responsive Width:

PHP: 7.0.33-0+deb9u11+hw1 Page Time: 0.051s Queries: 23 (0.032s) Memory: 0.7995 MB (Peak: 1.8991 MB) Data Comp: Off Server Time: 2024-05-10 10:25:01 UTC
Valid HTML 5 and Valid CSS