Anyone know where I can find a safety lever for any MS 1900 to 1950? I don't want to mess with my original and it hits the scope. Thanks
I think Springfield Sporters in Pennsylvania has Greek 1903 parts. And I've seen them on Ebay.
Thanks. Their site says that they are on vacation and has nothing else to look at. I'll keep looking until they come back.
Springfield Sporters is back online.
No safety under the greek parts. Only one that I can find is the 95 dutch. I'll phone tomorrow.
You will get it here - but it's in Austria.....
Ask, if he will ship it to the USA :
http://mannlich-schönauer.com/epages/7569f25f-53b4-4f25-bf74-e98325f648c3.sf/de_DE/?ObjectPath=/Shops/7569f25f-53b4-4f25-bf74-e98325f648c3/Categories/7
Cheers,
Gunwolf
Gunwolf is this what you are talking about?
http://xn--mannlich-schnauer-b0b.com/epa...8c3/Products/75I need one for the rear of the bolt.
Ok, I think it's this one:
Mannlicher Sicherung Gunwolf
Thanks Gunwolf that would be it. I have emailed them to see if they will ship.
Perfect - please let me know, good luck!
Gunwolf
Try Stephen Nelson at Nelson's Custom Guns in Corvallis, OR. He's a specialist in MS restoration. Phone is (541) 745-5232. email is
www.mannlicherschoenauer.com. Nice guy, who might just have the part or know where one is.
Mike Armstrong
Thanks Mike I'll give him a call also.
Mike Harrell,
The M88 Commission rifle was the "daddy" of these, maybe Springfield Sporters or Sarco has a safety you wouldn't mind altering.
Mike
No reply from http://mannlich-schönauer.com. The gun parts dealers that I phoned didn't have one either. I'll keep looking.
Don't suppose this will work?
https://www.ebay.ca/itm/Steyr-Mannlicher-1895-M95-PART-SAFETY/332551766277?hash=item4d6da14105:g:eoQAAOSwUwFaHtSt
p.s.
more reading
http://www.doublegunshop.com/forums/ubbthreads.php?ubb=showflat&Number=187725
You can try
Empire Gun Shop
120 Liberty Valley Rd
Danville PA 17821
(570) 275-5482
One man operation,,does a lot of shows selling gun parts so might not be there on the weekends.
Pete Jr(?) Donato running it now,,took over from (late)Pete Sr
I've bought a lot of parts from them over the years inclu 1903 Greek M/S parts (most recently trigger parts).
Can you post a picture of the safety hitting the scope as well as the mounts and some full pictures of the gun. Depending on the rings and bases it might be as easy as getting a higher ring.
For example griffin and howe have a high version of there rings which allows the safety to be used.
I would try: Lee's Gun Parts
3401 W Pioneer Dr
Irving Texas 75061
Phone: 972-790-0773
Fax: 972-313-0991
Hours: 9-5 Tues, Wed. and Thurs. only
He has had M-S parts in the past. You may have to call several times as his phone stays busy.