I bought this stock wax probably 5 or 6 years ago when I purchased some gun stock stains from them and I never got around to trying it until today. Before I applied it my stock had a slightly ruff feel to it in places. 10 minutes later with hardly any effort it was velvet smooth and had a beautiful glow to it.

The application calls for applying then waiting 10 minutes for it to dry then buff with a soft cloth.
The solution is as clear as water has a slight smell to it. When it dries it doesn't cloud over like normal wood waxes really no sign it was applied.

I did a second gun with a well worn finish. I didn't try to avoid the checkering...10 minutes later I buffed it with soft cloth....there was a nice glow to it with no sign that any wax had ever been applied.

Not sure how it will hold up in the field but I was amazed at the ease of application.

I wonder if they sold me a can of water with a dash of mineral spirits in it....all kidding aside it would pay you to try it.

Perma Wax sounds easy. I need to try it. How’s it better than Renaissance wax?

Thorny, who spent quality time waxing his Beesley ,would be so proud of you, hOmy.

Best,
Ted

Thompson's Water Seal (solvent based red label!) is better than any wax. Will not harm any finish.
JR

That's a new one on me, John. I'd have been scared to death to try it on a nice finish. How do you apply it?

Just had a thought .................. wonder how Rain-X would work?

SRH

those of you that wax stocks, what do you do when it comes time for the once-a-year application of stock finishing oil, or do you not do that? I have not liked the effect of Johnson's Paste wax or similar on my gunstocks but I have not try Ren. Wax or some of the others that may be different.

The guns I wax don't get any touch-up finish at year end. They stay as they are until they need a complete refinish.

SRH

Stan,
Just put it on a soft cloth and apply all over, even metal. Wait a little for solvent (it's very mild solvent-based) to evaporate, then rub down thoroughly. It leaves a nice protective film that totally rejects water.

I think Rain-X would work great as well.
JR

I suppose you could rub them down with hog lard too...I'm sure it would "work great" too.

I sure miss ol'Lowell...the pictures of his Beesley proping up the pine tree were always inspiring.

Perma wax is made by a company that only sells/makes gun related products...I've been using their stains for 20 years.

Renaissance is a curators wax designed to be used in museums. I've used Renaissance on ivory and exotic woods since it became available in the USA. I've used it on vintage guns (metal and wood) in a down pour it seemed like it washed off pretty quick.
I don't believe Renaissance was designed with the outdoorsman in mind.

I used to wax some of my oil finish guns but I gave up because the few waxes I tried got gummy in hot and humid weather. Dove season in Yuma turned the wax to glue when it was 120 and rainy.

I'd be surprised if the out come would be the same with this product.

The original Rain-X contained acidified isopropynol. I've read that the newer version also contains some silicone. I don't think I want either one near my gun stocks. I recall seeing a formula to make a home made version of Rain-X that involved mixing about a teaspoon of either sulphuric or nitric acid with a pint of isopropanol. This wasn't the watered down version you put in your windshield washer reservoir. It was to be wiped on and then buffed off. I think I'll stay with using Rain-X strictly on my windshield.

I've had good luck with Johnson's Paste Wax on my gun stocks, and it sheds water even after hunting all day in steady rain. But this Laurel Mountain Perma Wax sounds interesting. Like jOe says, Laurel Mountain has a full line of gun care and refinishing products, and I have used their Permalyn stock finish. I think jOe mentioned that Johnson's Paste Wax has a stronger smell a few days ago, and might spook some game animals. I don't think the wax smell is near as noticeable as Hoppes No. 9, and have no idea if deer like the smell of the Hoppes as much as I do. I still have about a quart of the old nitrobenzene formula which smells like pure heaven.

What did you think of their Permalyn stock finish ?

I like it and think it has it's place, but it is an oil modified urethane that has a heavy enough viscosity that it will be more appropriate on modern guns than vintage shotguns. There are people who want the stock on a vintage gun to have every pore perfectly filled and as shiny as a new Browning. But that look ain't for me. Of course, it can be thinned to get it to penetrate and seal the stock, and it really does a great job there. I'm pretty sure that the Permalyn sealer is little more than thinned Permalyn.

An "on the surface" oil modified urethane finish is going to be durable and more weather resistant than a traditional oil finish. And I've never seen any complaints about Permalyn failing. These on the surface finishes are more prone to fine scratches over time, but the surface can be rubbed out and repaired with a very thin top coat. I will say that at almost $50.00 a quart, it has certainly gone up in price since I last bought it. But $50.00 a quart is an absolute bargain compared to stuff like the oft recommended Timberluxe. When it comes to that product, I'll simply say there's proof that a fool and his money are soon parted.

You recall the application instructions ?

It is fine on a hard used competition gun. I use it on two of mine. But it is definitely not quite appropriate for a hunting firearm, particularly a vintage gun anyway.

https://www.midwayusa.com/product/1006490026/laurel-mountain-permawax-gunstock-wax-4-oz-liquid


Check out the video...…


"Thanks for the biness"

Nice video...he got the part wrong about Renaissance wax being designed for guns.

It was designed for museums.