any interest in this?
A CUSTOM MADE 28 GAUGE SXS SHOTGUN THAT IS A REPRODUCTION OF THE ITHACA NID MODEL, AS MADE IN THE LATE 1930'S. IT WAS CREATED FROM AN ITHACA CLASSIC DOUBLES PARTS KIT, PLUS ADDITIONAL PARTS CUSTOM MADE AS REQUIRED... THE 28" BARRELS ARE NOT YET CHOKED. THE BORES REQUIRE FINAL HONING TO THE DEGREE OF CHOKE DESIRED. THE MORE THE BARRELS ARE HONED THE LIGHTER THE GUN WILL BECOME...THIS UNIQUE GUN IS EQUIPPED WITH AUTOMATIC EJECTORS AND DOUBLE TRIGGERS. THE LENGTH OF PULL IS 14 5/8" WITH A 2 5/8" DROP AT HEAL... DUE TO ITS EXTRA HEAVY BARRELS, THIS GUN PRESENTLY WEIGHS 8 POUNDS. THIS CAUSES THE BALANCE OF THE GUN TO BE FORWARD OF THE HINGE PIN, WHICH RESULTS IN A WONDERFULLY SWINGING GUN ON THE SKEET RANGE; PLUS IT IS A VERY EFFECTIVE RELEASED PHEASANT SHOOTING GUN WHEN LOADED WITH HEAVY ONE OUNCE SHELLS...INITIAL ASSEMBLY AND FINISH WORK WAS PERFORMED BY NEW HAMPSHIRE GUNSMITH ED LANDER, WITH FINAL FITTING BY VIRGINIA GUNSMITH GUNTER PFROMMER. FIELD GRADE NID ENGRAVING BY ADAMS AND ADAMS OF VERMONT. CASE HARDENING BY TURNBULL RESTORATIONS OF NEW YORK...
