http://pic20.picturetrail.com/VOL1309/13781133/24830286/414151835.jpg http://pic20.picturetrail.com/VOL1309/13781133/24830286/414151838.jpg http://pic20.picturetrail.com/VOL1309/13781133/24830286/414151837.jpg http://pic20.picturetrail.com/VOL1309/13781133/24830286/414151836.jpg

To The Double Gun Community -- I would appreciate your help in my attempt to identify the maker of this -- Side x Side Shotgun Cutaway -- As you can see it is a high quality working model that is missing the short cutaway barrel section that would make it complete - Important Note !! -- Look close and you will see one side of the frame is Scalloped and the other side is Striaght !! - I believe it is German -- possibly -- Sauer or Prussian Daley -- I need a set of barrels that will mount this gun or a set of barrels that could be made to fit and operate it -- they should be nice clean tubes that can be fitted and cut off aprox 2'' past the forearm -- there should be a small section cutaway in both tubes showing the forcing cones ( The reason I think both tubes is so the gun could not be called a -Sawed Off Shotgun ) If you think that you may have a barrel that could work I can send all important dimensions -- Also -- If there is a Skilled Gun Smith out there that would like to take on a fun project please let me know - Thank You -- Rick -- Note - The only marks on this cutaway is a small -- A W on the water table

Last edited by FAB; 03/03/19 01:54 PM.