Thanks for the quick replay.
I'll probably drive the pin back out and clean the pin and hole really well. Timing of the screw slot was something I hadn't considered.
The screw slot and head of the pin screw are a little abused. I may try to improve it some. The gun will never be totally restored having updated wood and mismatched barrels but it won't hurt to improve it any little bit I can.
I need 4 screws to finish up. The set screws on both sides of the hammer pin screws are missing and the small screw on the left side that cover the cocking lever pin. The rear trigger guard screw is wrong - just a common wood screw.
Galazan makes a set of screws but I can't find any in stock.
