S |
M |
T |
W |
T |
F |
S |
|
|
|
|
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
|
|
|
|
|
|
|
1 members (1 invisible),
403
guests, and
5
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums10
Topics38,579
Posts546,636
Members14,425
|
Most Online1,344 Apr 29th, 2024
|
|
|
Joined: Jan 2002
Posts: 7,704 Likes: 103
Sidelock
|
Sidelock
Joined: Jan 2002
Posts: 7,704 Likes: 103 |
Shane, its funny but I bought an A J Aubrey with 32" steel barrels last summer. My son found it in a local auction out in Bozeman, MT. Mine was just a little off face also, and the rear trigger is a bear to pull. I shot ducks with it last Fall but I shimmed the hook with a layer of Scotch Tape which tightened it up enough to lose the rattle. Those long barrels just keep swinging when I shoot at a passing duck so I shoot it surprisingly well.
If yours rattles when you shake it, it is off face and will get worse unless you do something to tighten it back up. Tape's cheaper than gun-smithing, but certainly not a permanent fix. I'm undecided whether to spend the money fixing the trigger pull and rejointing, but I do like the gun. Low pressure 6s will most certainly take down a turkey unless you insist on 40+ yard shots...Geo
|
|
|
|
Joined: Feb 2004
Posts: 181 Likes: 18
Sidelock
|
Sidelock
Joined: Feb 2004
Posts: 181 Likes: 18 |
A gun is either on the face, or it's not. If you are going to shoot it, please fix it first. It will get worse with every shot from now on (even with temporary "fixes"), and a proper repair will get more expensive.
|
|
|
|
Joined: Dec 2011
Posts: 909 Likes: 43
Sidelock
|
Sidelock
Joined: Dec 2011
Posts: 909 Likes: 43 |
Take it down and put a piece of that paper in the hook, and put the barrels back on. If that tightens it up and the fore end goes back on, shoot it and see if you like it. As with the tape this isn't a permanent fix but it will let you know if you want to have it fixed correctly. Which fore end attachment does your have? If the barrels are good and you like the dynamics of it get it rejointed. MKII
|
|
|
|
Joined: Dec 2001
Posts: 3,964 Likes: 89
Sidelock
|
Sidelock
Joined: Dec 2001
Posts: 3,964 Likes: 89 |
Shane, just take it over to Champlin. JJ Perodeau is the gunsmith there and most likely will give you an on the spot opinion. Good folks!
When an old man dies a library burns to the ground. (Old African proverb)
|
|
|
|
Joined: Jul 2011
Posts: 119
Sidelock
|
OP
Sidelock
Joined: Jul 2011
Posts: 119 |
That's what I like to hear Joe. I need to visit with them anyway about an article that one of the magazines I work for wants to do. I teach tomorrow night in Stillwater, so maybe I can get out of here early and swing by to see them.
Geo, thanks for the advice. I wonder... what loads were you shooting at ducks that were non-toxic and low pressure? I'm not a big duck hunter, but I might take it out for that just to harass my auto-loading black plastic shooting buddies. I don't ever insist on 40-yard shots for anything and certainly not for turkey. Maybe that's what I'll do.
|
|
|
|
Joined: Jul 2011
Posts: 119
Sidelock
|
OP
Sidelock
Joined: Jul 2011
Posts: 119 |
Hey Mark, it's got the spring attached forearm. No lever. And the Model 34 engraving. The paper did indeed tighten it up as tight as can be. That helps anyhow. I'll order in a couple boxes of shells from PolyWad and take it to the club to help me decide.
|
|
|
|
Joined: Jan 2002
Posts: 853
Sidelock
|
Sidelock
Joined: Jan 2002
Posts: 853 |
Has anyone tried this method: MidwayUSA Gunsmithing Tips Looks like a perfect repair for the hobby enthusiast. Craig
Ask not for whom the dog barks, it barks for thee... NRA Life Member
|
|
|
|
Joined: Jan 2002
Posts: 9,786 Likes: 765
Sidelock
|
Sidelock
Joined: Jan 2002
Posts: 9,786 Likes: 765 |
A few years back, there was an article in The Double Gun Journal about a well used Nitro Special, that was used primarily as a waterfowl gun, with heavy loads, after it's owner used a sheet of .004 brass to tighten the gun up-he didn't affix the brass permanently, he was just careful when cleaning or dismantling the gun. It was left, loose, on the hook. I seem to remember the gun was used, hard, for several decades in that form. I think he sold the gun to someone who used it the same way, using the same shim. I'm wondering if the guy in the video used too heavy a piece of shim, as he had to file on the breech end of the barrels to get the gun to close? Wouldn't it make more sense to smoke the shim itself, and work it down that way? Also, why the desire to make the shim permanent? I'm all for inexpensive fixes for inexpensive guns, and maybe there is more than one way to skin a cat. Best, Ted
|
|
|
|
Joined: Jan 2002
Posts: 7,704 Likes: 103
Sidelock
|
Sidelock
Joined: Jan 2002
Posts: 7,704 Likes: 103 |
Geo, thanks for the advice. I wonder... what loads were you shooting at ducks that were non-toxic and low pressure? I'm not a big duck hunter, but I might take it out for that just to harass my auto-loading black plastic shooting buddies. I used Bismuth factory loads in the Aubrey last Fall. I don't think they are particularly low pressure. Remember my barrels are steel and extremely stout and my wood is all good. Personally I do not shoot anything but low pressure or black powder in my damascus guns. However most of them are 'bird guns' and don't have the massive barrels the 'fowlers' have. Make your own decision about your gun or if you'd rather, get advice from someone knowledgeable who can personnaly inspect your barrels...Geo
|
|
|
|
Joined: Feb 2002
Posts: 2,859
Sidelock
|
Sidelock
Joined: Feb 2002
Posts: 2,859 |
Aluminum beer can shims are the only way to go, you get a nice cold beer to drink obtaining the aluminum for the shim. The nice thing about aluminum is that it's soft enough that with a little encouragement the first few times you open and shut the gun it'll self-fit. Steve
Approach life like you do a yellow light - RUN IT! (Gail T.)
|
|
|
|
|