|
S |
M |
T |
W |
T |
F |
S |
|
|
|
|
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
|
|
|
|
|
|
|
2 members (Edm1, Reidy),
266
guests, and
12
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums10
Topics38,572
Posts546,459
Members14,424
|
Most Online1,344 Apr 29th, 2024
|
|
|
Joined: Jun 2003
Posts: 592 Likes: 2
Sidelock
|
OP
Sidelock
Joined: Jun 2003
Posts: 592 Likes: 2 |
Hello,
I just picked up a Miroku 12 ga O/U in excellent condition and would like to put an oil finish on the stock & forend but have no experience with removal of the buttstock from this action. I've not removed the buttplate yet as don't have my tools handy so therefore do not know if it's a throughbolt plus pins securing the stock. If anyone can provide the correct procedure to remove and reinstall the buttstock I would greatly appreciate the help.
The recent article on the Japanese gun trade in the summer DGJ inspired the purchase. This is Miroku-only marked gun with 28" bbls and a decent amount of scroll engraving on action and trigger guard. Forend is slim 'lightening' style secured with a Deely latch. Seems lighter than Citori Lightening in same configuration but have not weighed it yet. Looks to have been used very seldomly with only minor surface marks in wood that has pretty decent figure. Hoping to bring out a bit more with an oil finish...
Jmc
Last edited by jmc; 08/07/11 11:38 AM.
|
|
|
|
Joined: Mar 2002
Posts: 2,857 Likes: 384
Sidelock
|
Sidelock
Joined: Mar 2002
Posts: 2,857 Likes: 384 |
remove the pad and take out the screw.
|
|
|
|
Joined: Jul 2010
Posts: 1,284
Sidelock
|
Sidelock
Joined: Jul 2010
Posts: 1,284 |
Hi JMC,
It's a long "allen" key. Well that's what we call them over here. I have the tool here but you are a bit far away. It's about 18 inches long with a handle on the end but it's basically a hex spanner. Gumshop will have one that sells Brownings and Mirokus.
T
|
|
|
|
Joined: Feb 2002
Posts: 2,859
Sidelock
|
Sidelock
Joined: Feb 2002
Posts: 2,859 |
I've found that you can often wedge a screw driver into an allen bolt tightly enough to unscrew it, otherwise nearly any auto parts store should be able to sell you an allen socket (for a socket wrench) with a head on it for an allen screw. Also, if you have an allen wrench that fits, but isn't long enough, you can saw it off and make an allen socket by fitting the straight sawed-off piece into a six sided socket wrench that's the same size as the allen wrench. Steve
Last edited by Rockdoc; 08/07/11 02:25 PM.
Approach life like you do a yellow light - RUN IT! (Gail T.)
|
|
|
|
Joined: Jun 2003
Posts: 592 Likes: 2
Sidelock
|
OP
Sidelock
Joined: Jun 2003
Posts: 592 Likes: 2 |
Thank you gentlemen. Sounds easy enough with the right tool.
-jmc
|
|
|
|
Joined: Jun 2008
Posts: 5,539 Likes: 170
Sidelock
|
Sidelock
Joined: Jun 2008
Posts: 5,539 Likes: 170 |
Please in this order Remove butt plate Remove screw holding trigger guard tang Remove screw/bolt inside stock ( use either extension and allen bit, socket or drag link tool). http://www.sears.com/shc/s/p_10153_12605_00934299000PMike
Last edited by skeettx; 08/07/11 05:19 PM.
USAF RET 1971-95
|
|
|
|
Joined: Jun 2003
Posts: 592 Likes: 2
Sidelock
|
OP
Sidelock
Joined: Jun 2003
Posts: 592 Likes: 2 |
skeettx,
Are you recommending the drag link bits as a preferred alternative to a correctly sized allen bit? About how long of an extension is required to reach the bolt?
Thanks for the added info!
Jerry
|
|
|
|
Joined: Jan 2002
Posts: 1,393
Sidelock
|
Sidelock
Joined: Jan 2002
Posts: 1,393 |
6mm hex wrench (Allen) with handle, see how long it has to be by putting a pencil down the hole and see how far in it is. A Perazzi stock removal tool will do quite well, if you have a friend with a P gun Mike
|
|
|
|
Joined: Apr 2005
Posts: 1,688 Likes: 31
Sidelock
|
Sidelock
Joined: Apr 2005
Posts: 1,688 Likes: 31 |
Be aware that there can be various sized bolts used over the years including hex heads 1/2"AF and 12mm. Also some variants have the trigger guard tang screwed in and others do not.Butt pads can have hidden screws (Phillips Head normally) their fixing holes could be plugged or nearly invisible slits in the rubber.
|
|
|
|
Joined: May 2010
Posts: 1,532 Likes: 85
Sidelock
|
Sidelock
Joined: May 2010
Posts: 1,532 Likes: 85 |
The older ones usualy have a screw slot, Take the heel plate off and shine a light down the hole ,you will see what the bolt head is like.
|
|
|
|
|
|