Sure, George. I made mine from stuff I had around. It is set up to be clamped in a vise which keeps things at a nice working height. The base is a trap part and the press arm is some oak flooring with the return spring mounted as shown. Epoxy the washers around a 1/4 bolt tapped into the base, the pivot is a 1/4 20 bolt tapped in, the spring retainer is a slit pin pressure fitted. Voila c'est ca. Loads six in six seconds.
[img:center][/img] [img:center][/img] [img:center][/img] [img:center][/img] [img:center][/img] [img:center][/img] [img:center][/img]